Driveway Gates, Kamloops, BC
Custom driveway gates for Kamloops, automated swing and slide gates in steel and aluminum for acreage and large-lot properties, fabricated at our Burnaby shop and installed across the Thompson valley.
Driveway Gates, Kamloops
Custom driveway and pedestrian gates, swing, slide, and cantilever designs in steel, aluminum, and hybrid materials.
Driveway gates make sense on the acreage and large-lot properties around Kamloops, Barnhartvale, Dallas, Pineview Valley, and the rural edges where lots are big enough that a gate is about access control and presence, not just a fence opening. We fabricate swing and slide gates in steel and aluminum at our Burnaby shop, integrate the automation and safety systems, and install in Kamloops as a planned project. The dry Interior climate and the wide-open exposure on these lots drive the spec: UV-stable powder-coat finishes that hold colour under strong sun, thermal-movement allowance on long gate leaves, and wind-rated design for exposed valley sites. Automated gates are detailed to the UL 325 safety standard with the sensing and reversing features that standard requires.
Kamloops is our anchor city in the BC Interior. We fabricate at our Burnaby shop and run completed assemblies up the Coquihalla (Highway 5) to Kamloops sites, a model that suits the larger institutional, commercial, and custom-residential scopes the city generates. Our reference project here is the stair fabrication and installation we delivered for Interior Health at Royal Inland Hospital. Kamloops sits at the confluence of the North and South Thompson rivers in a semi-arid valley: hot dry summers above 35°C, intense UV, low annual precipitation, and wide day-to-night temperature swings. Those conditions change the metalwork brief, UV-stable powder coat over salt-driven galvanizing logic, and thermal-movement detailing on long steel runs that you don't worry about on the coast.
Configurations we fabricate
Kamloops context
Kamloops's climate, building stock, and permit process shape every driveway gates project we deliver here.
Climate
Design snow load for Kamloops is roughly 2.4 kPa ground. Coastal exposure is none. Interior seismic zone, lower demand than the coast, but connections still detailed per CSA W47.1. These are the numbers the engineer pulls when sizing steel for a driveway gates here.
Permits
City of Kamloops requires building permits for new staircases, structural modifications, and load-bearing guardrail work. Confirm scope with the Kamloops building department before fabrication.
Local neighbourhoods
We work throughout Kamloops, including Sahali, Aberdeen, Lower Sahali, Upper Sahali, Downtown / City Centre, North Kamloops, Brocklehurst, Westsyde. Most sites are a 3.5 hours via the Coquihalla (Highway 5) drive from our Burnaby shop.
Cost for Kamloops
Installed pricing from our Burnaby shop. Mobilization to Kamloops is included for standard drive-time sites.
| Type | Installed cost |
|---|---|
| Single pedestrian gate Fabricated and installed | $4,500, $8,000 |
| Double swing driveway gate, manual Standard residential spec | $8,000, $15,000 |
| Double swing driveway gate with automation Operator, sensors, keypad, intercom | $14,000, $28,000 |
| Slide gate with track Alternative for narrow driveways | $12,000, $22,000 |
| Cantilever slide gate No ground track, longer spans | $18,000, $35,000 |
| Custom heritage / ornamental gates Period-appropriate detailing | $15,000, $40,000+ |
All figures include fabrication, finish, and installation. For a Kamloops-specific project quote, request a quote.
Process
1. Site visit and design. Opening measurement, slope check, operator type selection, and design discussion.
2. Quote. Written quote with gate, operator, and automation scope itemized.
3. Shop drawings. Gate elevation, post and hinge details, operator coordination.
4. Fabrication. Steel cutting, welding, and assembly at our Burnaby shop.
5. Finishing. Hot-dip galvanizing and powder coating for exterior durability.
6. Installation and commissioning. Post setting, gate hanging, operator installation, and final programming.
Related products in Kamloops
Driveway Gates across Metro Vancouver
FAQs
Answers to the questions we hear most often from Kamloops homeowners, architects, and GCs on driveway gates projects.
Driveway gate cost in Kamloops depends on size, swing versus slide, material, automation and access controls, and footing and electrical work at the site. Automated gates cost more than manual ones because of the operator, safety sensors, and wiring. <a href="/request-a-quote/">Request a quote</a> with your opening width and site details and we'll follow up with project-specific pricing.
Yes. Automated driveway gates are designed to the UL 325 safety standard, which requires entrapment-protection sensing and auto-reverse. We detail the safety systems into every automated gate and coordinate the operator and electrical scope.
A duplex system where the gate touches grade, hot-dip galvanizing plus a UV-stable powder topcoat. The dry climate is easier on steel than the coast, but a driveway gate takes full sun and wind on an exposed valley lot, so colour-stable topcoat and proper drainage at the footing matter most.
It depends on the driveway slope and the space beside the opening. Sloped rural driveways often favour a slide gate because a swing leaf can bind on a grade; flat lots with room to either side suit a swing gate. We assess the site and recommend the right type before fabrication.
Yes. We fabricate the gate and integrate the hardware in Burnaby, then install and commission the automation in one planned mobilization up the Coquihalla, the same fabricate-and-install model behind our Interior Health stair work.
Get in touch
Send us drawings, photos, or a project description. We will review the scope and follow up with a quote covering engineering, fabrication, and installation from our Burnaby shop.
