Driveway Gates, Port Moody, BC
Custom driveway gates for Port Moody, Heritage Mountain luxury residential, Glenayre larger lots, and waterfront properties. Premium automation and finishes.
Driveway Gates, Port Moody
Custom driveway and pedestrian gates, swing, slide, and cantilever designs in steel, aluminum, and hybrid materials.
Port Moody driveway gate work is concentrated on Heritage Mountain luxury residential and larger-lot properties in Glenayre, College Park, and along April Road. Heritage Mountain custom home gates typically use premium finishes (bronze, stainless) and full automation with home system integration, budgets running $20,000, $45,000. Our Burnaby shop is 20 to 30 minutes up Lougheed Highway.
Port Moody has a strong luxury residential market on Heritage Mountain and along the Burrard Inlet waterfront, paired with a growing Inlet Centre density hub near Moody Centre station. Residential work here leans into modern architectural metalwork, frameless glass railings on view lots, mono stringer staircases inside open-plan contemporary homes, and custom entry canopies. Our shop is 20 minutes up Lougheed Highway from Moody Centre.
Configurations we fabricate
Port Moody context
Port Moody's climate, building stock, and permit process shape every driveway gates project we deliver here.
Climate
Design snow load for Port Moody is roughly 1.8 kPa ground. Coastal exposure is moderate. Vancouver seismic zone, waterfront exposure on Burrard Inlet. These are the numbers the engineer pulls when sizing steel for a driveway gates here.
Permits
City of Port Moody requires permits for structural and guardrail work. Waterfront setbacks along Burrard Inlet add environmental review in some cases.
Local neighbourhoods
We work throughout Port Moody, including Heritage Mountain, Moody Centre, Glenayre, College Park, Harbour Heights, Pleasantside, April Road, Barber Street. Most sites are a 20 to 30 minutes drive from our Burnaby shop.
Cost for Port Moody
Installed pricing from our Burnaby shop. Mobilization to Port Moody is included for standard drive-time sites.
| Type | Installed cost |
|---|---|
| Single pedestrian gate Fabricated and installed | $4,500, $8,000 |
| Double swing driveway gate, manual Standard residential spec | $8,000, $15,000 |
| Double swing driveway gate with automation Operator, sensors, keypad, intercom | $14,000, $28,000 |
| Slide gate with track Alternative for narrow driveways | $12,000, $22,000 |
| Cantilever slide gate No ground track, longer spans | $18,000, $35,000 |
| Custom heritage / ornamental gates Period-appropriate detailing | $15,000, $40,000+ |
All figures include fabrication, finish, and installation. For a Port Moody-specific project quote, request a quote.
Process
1. Site visit and design. Opening measurement, slope check, operator type selection, and design discussion.
2. Quote. Written quote with gate, operator, and automation scope itemized.
3. Shop drawings. Gate elevation, post and hinge details, operator coordination.
4. Fabrication. Steel cutting, welding, and assembly at our Burnaby shop.
5. Finishing. Hot-dip galvanizing and powder coating for exterior durability.
6. Installation and commissioning. Post setting, gate hanging, operator installation, and final programming.
Related products in Port Moody
Driveway Gates across Metro Vancouver
FAQs
Answers to the questions we hear most often from Port Moody homeowners, architects, and GCs on driveway gates projects.
Port Moody driveway gate cost depends on gate type, width, finish, automation scope, and whether the project is a Heritage Mountain luxury residential installation with home system integration or a standard residential gate in Glenayre or College Park. Our Burnaby shop is 20 to 30 minutes up Lougheed Highway. <a href="/request-a-quote/">Request a quote</a> with your site dimensions and we'll follow up with project-specific pricing.
Yes. Heritage Mountain custom home driveway gates are one of our core Port Moody scopes. They typically involve architectural coordination, premium finishes, and full home automation integration. Shop drawings go through architect review before fabrication.
Waterfront properties along Burrard Inlet see moderate salt exposure. We spec 316 stainless hardware and duplex hot-dip galvanizing + powder coat on the gate framing. Operator enclosures use stainless or fiberglass NEMA 4X ratings.
Standard residential gate permits run 4 to 8 weeks. Waterfront properties may require environmental review. We provide engineering and documentation as part of standard scope.
Yes. Integration with Control4, Crestron, Savant, and other home automation systems is standard on Heritage Mountain luxury projects. Gate status, entry events, and remote operation are exposed to the home control system.
10 to 14 weeks for standard projects, 14 to 18 weeks for luxury architectural projects with more design coordination.
Get in touch
Send us drawings, photos, or a project description. We will review the scope and follow up with a quote covering engineering, fabrication, and installation from our Burnaby shop.
