Structural Steel Fabrication in Surrey

Surrey generates more construction volume than any city we serve except Vancouver, and the structural steel work spans the whole spread. At the institutional end, we have delivered metalwork at Surrey Memorial Hospital, the kind of site where submittal tracking, infection-control hoarding, and scheduled access windows are part of the scope, not an afterthought. On the commercial side, our work at Guildford Town Centre put us inside an operating retail environment, phased night work, protected public routes, and zero tolerance for an unfinished condition at opening time. The industrial stock in Port Kells and Bridgeview turns over mezzanine platforms, equipment support frames, and crane-served structures as tenants change. And the custom home market in South Surrey, Morgan Creek, and Elgin runs beam and column packages for large open-plan houses, with Crescent Beach and White Rock properties adding coastal exposure that moves exterior steel to hot-dip galvanizing. Our Burnaby shop is 30 to 50 minutes out depending on traffic, so Surrey scopes get planned deliveries rather than casual ones, full loads sequenced to the erection plan. Design loads are standard Lower Mainland numbers, a ground snow load around 1.6 kPa with Vancouver-zone seismic detailing per CSA W47.1. City of Surrey permits run 4 to 10 weeks depending on scope, and White Rock is a separate jurisdiction with its own building department, which matters if your project sits near the boundary.

Surrey has one of the most active custom home markets in Metro Vancouver, particularly in South Surrey, White Rock, and Morgan Creek. Our shop is 30 to 45 minutes from most Surrey sites depending on traffic. We work with custom home builders, architects, and homeowners across these neighbourhoods on staircase, railing, gate, and structural steel packages. Institutional clients include Surrey Memorial Hospital and SFU's Surrey campus.

• Beam and column packages, W-shapes, HSS, and built-up sections for residential and commercial framing
• Complete structural frames, single-storey residential through multi-storey commercial
• Steel canopies, porte-cocheres, and overhead structures
• Stair towers and commercial egress stair structures
• Mezzanine and loft platforms for warehouses and tenant improvements
• Elevator-shaft steel for retrofits and low and mid-rise projects
• HVAC and mechanical equipment support frames
• Miscellaneous steel packages, lintels, embeds, ladders, guards, and bollards
• Seismic retrofit steel, moment frames and braces for older buildings

Neighbourhoods where this work shows up

• Whalley and Guildford, institutional and commercial steel, including our Surrey Memorial Hospital and Guildford Town Centre scopes.
• Port Kells and Bridgeview, mezzanines, equipment support frames, and industrial tenant improvement steel.
• South Surrey, Morgan Creek, Elgin, beam and column packages for large custom homes.
• Crescent Beach and White Rock, coastal-exposure exterior steel with galvanized finish specs.

• Tonnage and span, member sizes step up quickly once clear spans grow, and every other line item scales with the steel weight
• Connection complexity, moment connections, seismic detailing, and delegated connection design add engineering and fabrication hours
• Finish system, shop primer for enclosed steel, hot-dip galvanizing per ASTM A123 for exterior exposure, powder coat or intumescent coatings where specified
• Engineering scope, whether connections are detailed by the engineer of record or delegated to the fabricator
• Site access and erection conditions, crane positioning, lane closures, night-work windows, and laydown space
• Schedule compression, acceleration is achievable but carries overtime, split deliveries, and priority finishing slots

For a Surrey-specific number, send drawings or a project description and request a quote. We price against documents, not from a rate table.

1. RFQ and scope review. We price against the structural drawings and spec sections, and state assumptions and exclusions in writing. Residential quotes in 2 to 5 business days; commercial tenders within the tender window.

2. Shop drawings. Detailed 3D drawings of every member and connection. Anchor bolt and embed layouts release first so foundations are never waiting on steel.

3. Engineer review. Submittals tracked through the engineer of record and architect review cycle, with fast responses to review comments.

4. Fabrication. Steel cut, drilled, fit, and welded at our Burnaby shop under C.W.B. supervision to CSA W47.1, with mill certificate traceability.

5. Finishing. Shop primer, hot-dip galvanizing per ASTM A123, powder coat, or intumescent systems per the specification.

6. Delivery and erection. Steel sequenced to the erection plan, crane picks coordinated with the site, field connections bolted or welded by C.W.B. qualified crews, then inspection documentation at closeout.

Recent Surrey project notes

• Our institutional work at Surrey Memorial Hospital and retail scope at Guildford Town Centre anchor our Surrey track record, both delivered inside operating facilities.
• Beam and column packages for South Surrey and Morgan Creek custom homes are the core of our residential steel work here.