Driveway Gates, Richmond, BC
Custom driveway gates for Richmond custom homes, Steveston, Terra Nova, Thompson, and Seafair. Swing, slide, and automated installations.
Driveway Gates, Richmond
Custom driveway and pedestrian gates, swing, slide, and cantilever designs in steel, aluminum, and hybrid materials.
Richmond driveway gate work concentrates on Steveston, Terra Nova, Thompson, and Seafair, the west-side custom home markets where larger lot sizes and custom home construction support full gate installations. Typical budgets run $12,000, $30,000 with automation. Properties along the Fraser River dike see moderate salt exposure and use 316 stainless hardware. Our Burnaby shop is 25 to 40 minutes from Richmond.
Richmond is an island city built on the Fraser delta, flat, windy, with aggressive saltwater exposure at Steveston and along the Fraser River dike. Most of our residential work here is on the west side: Steveston, Terra Nova, and the custom home corridors overlooking the river. High-rise density in City Centre and Brighouse keeps commercial metalwork active, and the airport corridor has steady industrial demand.
Configurations we fabricate
Richmond context
Richmond's climate, building stock, and permit process shape every driveway gates project we deliver here.
Climate
Design snow load for Richmond is roughly 1.5 kPa ground. Coastal exposure is high. Vancouver seismic zone, delta soils require additional geotechnical review on some sites. These are the numbers the engineer pulls when sizing steel for a driveway gates here.
Permits
City of Richmond permits standard 4 to 8 weeks. Flood construction level (FCL) requirements apply to low-elevation properties along the Fraser River.
Local neighbourhoods
We work throughout Richmond, including Steveston, Terra Nova, Thompson, Seafair, Riverdale, Hamilton, Broadmoor, Richmond City Centre. Most sites are a 25 to 40 minutes drive from our Burnaby shop.
Cost for Richmond
Installed pricing from our Burnaby shop. Mobilization to Richmond is included for standard drive-time sites.
| Type | Installed cost |
|---|---|
| Single pedestrian gate Fabricated and installed | $4,500, $8,000 |
| Double swing driveway gate, manual Standard residential spec | $8,000, $15,000 |
| Double swing driveway gate with automation Operator, sensors, keypad, intercom | $14,000, $28,000 |
| Slide gate with track Alternative for narrow driveways | $12,000, $22,000 |
| Cantilever slide gate No ground track, longer spans | $18,000, $35,000 |
| Custom heritage / ornamental gates Period-appropriate detailing | $15,000, $40,000+ |
All figures include fabrication, finish, and installation. For a Richmond-specific project quote, request a quote.
Process
1. Site visit and design. Opening measurement, slope check, operator type selection, and design discussion.
2. Quote. Written quote with gate, operator, and automation scope itemized.
3. Shop drawings. Gate elevation, post and hinge details, operator coordination.
4. Fabrication. Steel cutting, welding, and assembly at our Burnaby shop.
5. Finishing. Hot-dip galvanizing and powder coating for exterior durability.
6. Installation and commissioning. Post setting, gate hanging, operator installation, and final programming.
Related products in Richmond
Driveway Gates across Metro Vancouver
FAQs
Answers to the questions we hear most often from Richmond homeowners, architects, and GCs on driveway gates projects.
Richmond driveway gate cost depends on gate type, width, material, automation scope, and site conditions. Properties along the Fraser River dike require upgraded 316 stainless hardware for moderate salt exposure. Richmond's flat delta terrain and wind exposure affect gate type selection and operator spec. Our Burnaby shop is 25 to 40 minutes from Richmond. <a href="/request-a-quote/">Request a quote</a> with your site dimensions and we'll follow up with project-specific pricing.
316 stainless throughout for any property within 100 m of the dike. Duplex finishing on gate framing. The moderate salt exposure and wind-driven spray would cause corrosion on standard hardware over time.
Yes. Driveway gates are a regular scope on Steveston and Terra Nova new custom homes. We coordinate with the builder through shop drawings and install after driveway and landscape completion.
Yes, somewhat. The flat delta terrain and prevailing Fraser River winds mean gate uplift on wide swing gates can be significant. We adjust operator selection and post foundations for higher wind zones. Slide gates are sometimes preferred on particularly exposed lots.
Standard residential gate permits run 4 to 8 weeks. Commercial projects extend to 8 to 12 weeks. Engineering is required for structural posts and operators.
FCL affects main floor elevations and sometimes driveway grade but not gate installation directly. We adjust post foundation depth if the site has high water table conditions, which is relatively common in Richmond.
Get in touch
Send us drawings, photos, or a project description. We will review the scope and follow up with a quote covering engineering, fabrication, and installation from our Burnaby shop.
