Canopy Structures, Burnaby, BC
Custom steel canopy structures for Burnaby homes and businesses, entry canopies, covered walkways, and commercial canopies engineered to BC Building Code by our C.W.B. certified shop on Douglas Road.
Canopy Structures, Burnaby
Custom steel canopy structures, entry canopies, walkway covers, porte-cochères, and commercial canopies engineered for Metro Vancouver weather.
Burnaby canopy structure work is a steady mix of residential entry canopies on custom homes in Buckingham Heights and Deer Lake, strata and multifamily retrofit projects in Metrotown and Brentwood, and commercial scopes tied to the ongoing redevelopment along Kingsway and Canada Way. Because our shop is on Douglas Road, 5 to 15 minutes from most Burnaby sites, we handle everything from single-day residential entry canopy installs to larger phased commercial projects without the drive time affecting scheduling. Burnaby's 1.6 kPa ground snow load and standard Lower Mainland wind exposure mean canopy engineering is straightforward, it is the connection detailing and retrofit conditions that usually drive project complexity. For older Burnaby homes where a new canopy is being added to an existing wood-framed wall, we inspect the host framing during the site visit and include any required reinforcement as part of the scope.
Burnaby is our home city. Our fabrication shop sits at 2544 Douglas Rd #106 in the Douglas Road industrial pocket, five minutes from Metrotown, ten from Brentwood. Burnaby's building mix is unusually wide, 1960s single-family homes in Deer Lake and Burnaby Heights, 50-storey condo towers going up in Metrotown and Brentwood, and institutional work at BCIT and Burnaby Hospital. That means custom metalwork projects here can range from a one-day railing replacement to a multi-month commercial scope.
Configurations we fabricate
Burnaby context
Burnaby's climate, building stock, and permit process shape every canopy structures project we deliver here.
Climate
Design snow load for Burnaby is roughly 1.6 kPa ground. Coastal exposure is none. Vancouver seismic zone, all structural connections per CSA W47.1. These are the numbers the engineer pulls when sizing steel for a canopy structures here.
Permits
City of Burnaby requires building permits for new staircases, structural modifications, and load-bearing guardrail changes. Permit processing runs 4 to 8 weeks.
Local neighbourhoods
We work throughout Burnaby, including Metrotown, Brentwood, Lougheed Town Centre, Edmonds, Burnaby Heights, Capitol Hill, Deer Lake, Forest Hills. Most sites are a 0 to 20 minutes drive from our Burnaby shop.
Cost for Burnaby
Installed pricing from our Burnaby shop. Mobilization to Burnaby is included for standard drive-time sites.
| Type | Installed cost |
|---|---|
| Residential entry canopy, cantilevered 6 to 10 ft projection | $12,000, $22,000 |
| Residential entry canopy, column-supported Larger projection or covered patio | $15,000, $30,000 |
| Covered walkway, 20 to 40 ft span Multiple bays with continuous roof | $22,000, $55,000 |
| Porte-cochère, commercial or luxury residential Drive-through with high clearance | $45,000, $120,000+ |
| Architectural glass-top canopy Laminated glass panels on steel frame | $28,000, $75,000 |
| Commercial retail / storefront canopy With integrated lighting and signage | $18,000, $55,000 |
All figures include fabrication, finish, and installation. For a Burnaby-specific project quote, request a quote.
Process
1. Site visit and design review. Site measurements, host-structure inspection for retrofit projects, architectural drawing review.
2. Engineering. Sealed structural drawings, wind, snow, seismic loads per NBC 2020 climatic data for the specific site.
3. Shop drawings. Fabrication drawings coordinated with architect and GC. Connection details, finish schedule, drainage integration.
4. Fabrication. Steel cut, welded, and assembled at our Burnaby shop. CWB-certified welding throughout.
5. Finishing. Hot-dip galvanizing per ASTM A123, then powder coating, the duplex system handles Metro Vancouver rainfall for 25 to 30 years.
6. Installation. Site install with crane support where required. Connection to host structure or foundation per engineered drawings.
Related products in Burnaby
Canopy Structures across Metro Vancouver
FAQs
Answers to the questions we hear most often from Burnaby homeowners, architects, and GCs on canopy structures projects.
Burnaby canopy cost depends on projection length, configuration (cantilevered versus column-supported), finish spec, drainage requirements, and whether the project is residential, strata, or commercial. Entry canopies on Buckingham Heights and Deer Lake custom homes are a different scope from strata retrofit canopies in Metrotown or Brentwood, building type, access conditions, and engineering complexity all vary. Because our shop is on Douglas Road, mobilization to Burnaby is effectively free. <a href="/request-a-quote/">Request a quote</a> with your site dimensions and we'll follow up with project-specific pricing.
Yes. The City of Burnaby requires a building permit for structural canopies, including residential entry canopies and commercial canopies. The permit application includes a sealed drawing from a registered structural engineer and envelope coordination details for the connection through the building envelope. Processing typically runs 4 to 8 weeks.
Yes. Strata canopy work typically involves retrofit or replacement of original canopies on 1980s, 1990s buildings in Metrotown and Edmonds. We coordinate with the strata council, property manager, and engineering consultant, same coordination pattern as a strata railing replacement project. Permits, engineering, and phased install scheduling are handled as part of our standard strata scope.
Burnaby's design ground snow load is around 1.6 kPa, with roof shape and exposure factors applied per NBC 2020. That translates to roughly 33 psf ground snow. Your structural engineer pulls the exact number during the design phase, including drift factors at the connection to the host building. Standard residential canopies are straightforward to engineer for these loads.
Yes, up to about 8 to 10 ft of projection depending on the host framing. For older Burnaby homes with 2x framing, we usually need to add a steel back-plate or reinforce the wall framing to handle cantilever loads. We inspect the host structure during the site visit and include any required reinforcement in the quote so there are no surprises during installation.
Expect 6 to 10 weeks from design approval to completed install for a standard residential entry canopy. Engineering runs 2 to 3 weeks, fabrication and finishing 3 to 4 weeks (including hot-dip galvanizing), and installation is a 1 to 2 day on-site visit. Commercial and strata retrofit projects extend to 10 to 16 weeks because of additional coordination and phased access.
Get in touch
Send us drawings, photos, or a project description. We will review the scope and follow up with a quote covering engineering, fabrication, and installation from our Burnaby shop.
